Engineering Graphics (EG) important questionsMost repeated in SPPU papers

Endsem questions (10)

1. 5×asked

   Right Hand Side View

   Feb 2026 ·May 2025 ·Apr 2025 ·Nov 2024 ·Nov 2023

2. 5×asked

   Sectional Front View along symmetry of object

   Feb 2026 ·May 2025 ·Nov 2024 ·Nov 2023 ·May 2023

3. 4×asked

   Construct an ellipse by directrix and focus method if distance of focus from the directrix is 60 mm. Take eccentricity e=1/2.

   Feb 2026 ·Apr 2025 ·May 2024 ·Nov 2023

4. 4×asked

   Draw the development of the lateral surface of a pentagonal pyramid having base edge 45 mm and axis height 90 mm resting on HP in such a way that one of its base edges is parallel to VP.

   Feb 2026 ·Apr 2025 ·Nov 2024 ·Nov 2023

5. 4×asked

   Fig. shows pictorial view of an object. Using first angle method of projection draw:

   Feb 2026 ·Apr 2025 ·Nov 2024 ·Nov 2023

6. 3×asked

   A square pyramid side of base 30 mm and axis 70 mm long is kept on HP in such a way that one of its base edges is parallel to the VP. A cutting plane bisects its axis at 45°. Draw the development of lateral surfaces of the square pyramid.

   Nov 2025 ·Nov 2024 ·May 2023

7. 2×asked

   Draw the development of lateral surfaces of a cone having base diameter 50 mm and axis height 100 mm resting on HP on its base.

   Feb 2026 ·Apr 2025

8. 2×asked

   The end Q of line PQ is 25 mm above HP and end P is 30 mm infront of VP. The distance between end projectors of line is 70 mm. Draw the projections of the line if the elevation and plan of the line make 40º and 50º with XY line respectively.

   Feb 2026 ·Apr 2025

9. 2×asked

   Draw an ellipse by rectangular method if the major axis and minor axis are 100mm and 70mm respectively.

   May 2025 ·May 2023

10. 2×asked

    Figures shows a pictorial view of an object. By using first angle method of projection, draw sectional Front View in the direction of X, Top View and Left-Hand Side View. Give dimensions in all views.

    May 2025 ·May 2023