Skip to content
Fourth Year EngineeringMechanical EngineeringSemester 83 credits

Quality & Reliability Engineering (QRE)SPPU question papers (PYQ), solutions and notes

Quality & Reliability Engineering for Final Year (BE) Mechanical Engineering

9

resources for this subject

Subject code MECHANICAL_BE_5860

Free to browse. Sign in to open files.

Quality & Reliability Engineering (QRE) is a semester 8 subject in Fourth Year Engineering, Mechanical Engineering, at Savitribai Phule Pune University (SPPU).

Here you’ll find 9 previous question papers (2023–2025).

Every question of 9 papers (Feb 2023 to Nov 2025) is written out on the paper pages below, so you don’t need to open a PDF.

Insem papers are 30 marks (1 hour) and endsem papers are 70 marks (2½ hours). These are 2019-pattern papers.

Papers for every BE Mechanical Engineering Sem 8 subject

QRE previous year question papers

Pick a paper to read all its questions. No sign-in needed.

EndsemNov 2025May 2025Nov 2024May 2024Nov 2023May 2023
InsemMar 2025Mar 2024Feb 2023

Most repeated QRE questions

Asked in more than one SPPU paper, out of 9 we have.

  1. 4×asked

    What is FMECA? Give the procedure of FMECA. State the importance of RPN in FMECA, with example.

    Nov 2025 ·May 2025 ·Nov 2023 ·May 2023

  2. 3×asked

    i) Explain factors affecting on Maintainability. ii) From the following data collected at a plant: Mean time before failure: 35 Hrs. Mean time to repair: 10 Hrs. Administrative and logistic time: 50% of MTTR Calculate operational availability and inherent availability of the plant.

    Nov 2025 ·Nov 2023 ·May 2023

  3. 3×asked

    Write Short notes on: i) Fault Tree Analysis ii) Ishikawa for failure representation (Cause Effect Diagram) iii) Symbols used in FTA

    Nov 2025 ·Nov 2023 ·May 2023

  4. 2×asked

    A beam is subjected to mean stress 180 N/mm 2 and standard deviation 20 N/mm 2 the mean strength of beam material is 280 N/mm 2 and standard deviation 40 N/mm 2 . Determine: i) Reliability of the Beam ii) Minimum Factor of Safety iii) Average factor of safety 

    May 2025 ·May 2023

  5. 2×asked

    A system have three elements 1, 2 and 3 connected in series with their failure rates of 1  = 0.006, 2  = 0.004, 3  = 0.001 per hour respectively Assuming mission time of 20 hours and system reliability of 0.92, find the reliability of each subsystem to achieve the desired reliability goal.

    May 2025 ·May 2024

See all 16 repeated questions

Quality & Reliability Engineering papers and notes

Related subjects