Skip to content

Power System Engineering-II important questionsMost repeated in SPPU papers

These 20 questions appeared in more than one SPPU Power System Engineering-II paper we have: 9 papers, from Feb 2023 to Mar 2026. The most-asked come first. Each one links to the papers it was asked in.

Repeated questions

Endsem questions (18)

  1. 5×asked

    Derive the equation of fault current in case of LG fault.

    Nov 2025 ·May 2025 ·Nov 2024 ·May 2024 ·May 2023

  2. 4×asked

    Draw the zero sequence impedance diagram for following connections of transformer i) Delta-Star ii) Delta-Star with solid ground [3] iii) Delta-star with neutral impedance [3]

    Nov 2025 ·May 2025 ·Nov 2023 ·May 2023

  3. 4×asked

    Draw the complete single line diagram of HVDC system showing all components and elaborate on any three components in detail.

    Nov 2024 ·May 2024 ·Nov 2023 ·May 2023

  4. 3×asked

    Constant Current control in HVDC

    May 2025 ·Nov 2024 ·Nov 2023

  5. 3×asked

    Compare HVDC and EHVAC transmission systems.

    Nov 2024 ·May 2024 ·May 2023

  6. 2×asked

    Draw the reactance diagram and write its formula for sub transient, transient and steady state period.

    Nov 2025 ·May 2025

  7. 2×asked

    Draw the waveform of fault current showing sub transient, transient and steady state period.

    Nov 2025 ·May 2025

  8. 2×asked

    From above diagram comment on time period sub transient, transient and steady state period.

    Nov 2025 ·May 2025

  9. 2×asked

    If the damper winding reactance is j0.1 pu, field winding reactance is j0.2 pu, armature reactance is j0.3pu and leakage reactance is j0.5pu. Calculate sub- transient, transient and steady state reactance.

    Nov 2025 ·May 2025

  10. 2×asked

    Let all phases of an alternator is short circuited at its terminal :

    Nov 2025 ·May 2025

  11. 2×asked

    Multi terminal HVDC

    Nov 2025 ·May 2025

  12. 2×asked

    Constant Extinction Angle Control in HVDC

    May 2025 ·May 2023

  13. 2×asked

    Show that in transformer the per unit impedance of referred to primary and secondary is same.

    May 2025 ·Nov 2024

  14. 2×asked

    Calculate fault current (in kA) supplied by the alternator and terminal voltage of the alternator, if the three-phase bolted fault occurs at point F. Take base at 100MVA, 11kV on alternator.

    Nov 2024 ·May 2024

  15. 2×asked

    Find the Y-BUS of the following system.

    Nov 2024 ·May 2024

  16. 2×asked

    Give a detail classification of the buses used in load flow analysis. 2

    Nov 2024 ·May 2023

  17. 2×asked

    Take base MVA = 25MVA and base kV = 11kV on the generator and draw per unit reactance diagram to these base values.

    Nov 2024 ·May 2024

  18. 2×asked

    State the advantages and disadvantages of per unit system in power system analysis. 2

    May 2024 ·May 2023

Insem questions (2)

  1. 2×asked

    A three phase transmission line has conductor radius of 0.50 cm and are spaced 3m in an equilateral arrangement. The air temperature is 26º Celsius and pressure is 74cm of Hg. Surface factor is 0.85. Take breakdown strength of air 30kV/cm (peak). Determine the i) Disruptive critical voltage in kV/ph. ii) Local visual critical voltage in kV/ph. Irregularity factor for local visual corona is 0.72. [2] iii) Visual critical voltage in kV/ph for general corona. Irregularity factor for general visual corona is 0.82. [2] 

    Mar 2025 ·Feb 2023

  2. 2×asked

    Derive the equation for ABCD parameters for long transmission line.

    Mar 2025 ·Feb 2023

Questions count as repeated when their wording matches closely across papers. Numericals that depend on a figure are left out, since the figure changes from paper to paper.